DECO FOIL FUSIBLE FABRIC SPRAY ADHESIVE - SPRAY GLUE FOR TEXTILES

Works great with fabrics! Make sure to use one of our many textile friendly foils.

Directions for use: Always pre-test for best results. Protect your work surface.

Place stencil design onto fabric. Mask off surrounding area to prevent overspray. For best results, spray back of stencil with repositionable spray adhesive.

Shake can well before use. Hold can upright, 6-8 inches for surface. Press nozzle in short bursts using a sweeping motion to apply an even medium coat of adhesive on fabric, making sure to cover the entire area.

Remove stencil and allow Deco Foil Fusible Spray Adhesive to dry for 10 minutes.

Cut a piece of foil slightly larger than the design. Place foil, color side facing up, on top of adhesive design. Place a piece of parchment paper over the foil.

Preheat iron to a high setting with steam. Place and hold the iron with firm pressure for 10 seconds on each section until entire piece is bonded. For best results, move iron slightly to avoid steam holes.

Remove parchment paper only and allow foil and adhesive to cool completely. For best results allow to cool for 1-2 hours.
Peel foil transfer sheet away from adhesive design.

Washing Instructions: Hand wash and lay flat to dry. If needed, machine wash on cold, delicate cycle. Do not iron or place in Dryer.